This exchange indicates required quantities and sizes of plumbing equipment (pumps, valves, boilers, filters) based on system performance. It does not account for particular piping layout, therefore calculated pressure drop is approximated based on elevation and nominal horizontal routing.
This exchange enables an architect to revise the facility spatial configuration plans based on the results of the coordination at the end of Design Schematic. Required information includes:
This exchange provides detailed information for connectivity and placement of pipes, including the following:
System Layout | ||||
---|---|---|---|---|
Entity/Concept | Attributes | Constraints | I | E |
IfcBoiler | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcBoilerType; | - | O |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_BoilerPHistory; Name=Pset_BoilerTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=STEAM;Name=Pset_BoilerTypeSteam;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=WATER;Name=Pset_BoilerTypeWater; | - | R |
Quantity Sets | IsDefinedBy | Name=Qto_BoilerBaseQuantities; | - | - |
Ports | PredefinedType IsNestedBy | PredefinedType=WATER;Name=Gas;Flow=SINK;Type=GAS; PredefinedType=WATER;Name=Exhaust;Type=EXHAUST;Flow=SOURCE PredefinedType=WATER;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=WATER;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SOURCE | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | - |
Clearance Geometry | Representation | - | - | |
IfcBuilding | ||||
Identity | GlobalId Name Description | - | R | |
Classification | HasAssociations | Source=CSI;Name=OmniClass;Tokens=11-00 00 00; | - | R |
Properties for Occurrences | PredefinedType IsDefinedBy | Name=Pset_BuildingCommon; | - | O |
Product Assignment | ReferencedBy | Type=IfcTask; | - | - |
Spatial Decomposition | IsDecomposedBy | Spatial Parts=IfcBuildingStorey; | - | R |
Building Location | ElevationOfRefHeight ElevationOfTerrain BuildingAddress | - | O | |
IfcBuildingStorey | ||||
Identity | GlobalId Name Description | - | R | |
Properties for Occurrences | PredefinedType IsDefinedBy | Name=Pset_BuildingStoreyCommon;TemplateType=PSET_OCCURRENCEDRIVEN; | - | - |
Building Storey Elevation | Elevation | - | R | |
Spatial Decomposition | IsDecomposedBy | Spatial Parts=IfcSpace; | - | O |
IfcDistributionPort | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=PIPE;Name=Pset_DistributionPortTypePipe; | O | O |
Material Profile Set Usage | HasAssociations | Name=Pipe;Profile=IfcCircleHollowProfileDef; | R | R |
Port Connectivity | ConnectedTo | O | R | |
Placement | ObjectPlacement | R | R | |
Properties for Types | HasPropertySets | - | - | |
IfcElectricAppliance | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcElectricApplianceType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_ElectricAppliancePHistory; Name=Pset_ElectricApplianceTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=DISHWASHER;Name=Pset_ElectricApplianceTypeDishwasher; | - | R |
Ports | PredefinedType IsNestedBy | PredefinedType=DISHWASHER;Name=HotWater;Flow=SINK;Type=DOMESTICHOTWATER; PredefinedType=DISHWASHER;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=FRIDGE_FREEZER;Name=ColdWater;Flow=SINK;Type=DOMESTICCOLDWATER; PredefinedType=WASHINGMACHINE;Name=ColdWater;Flow=SINK;Type=DOMESTICCOLDWATER; PredefinedType=WASHINGMACHINE;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=WASHINGMACHINE;Name=Drainage;Type=DRAINAGE;Flow=SOURCE | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | - |
IfcFilter | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcFilterType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_FilterPHistory; PredefinedType=;Name=Pset_FilterTypeCommon; PredefinedType=WATERFILTER;Name=Pset_FilterTypeWaterFilter; | - | R |
Ports | PredefinedType IsNestedBy | PredefinedType=ODORFILTER;Name=Inlet;Flow=SINK;Type=EXHAUST; PredefinedType=ODORFILTER;Name=Outlet;Type=EXHAUST;Flow=SOURCE PredefinedType=STRAINER;Name=Inlet;Flow=SINK;Type=DRAINAGE; PredefinedType=STRAINER;Name=Outlet;Type=DRAINAGE;Flow=SOURCE PredefinedType=WATERFILTER;Name=Inlet;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=WATERFILTER;Name=Outlet;Type=DOMESTICCOLDWATER;Flow=SOURCE | - | R |
Spatial Containment | ContainedInStructure | - | R | |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | - |
IfcFlowMeter | ||||
Identity | GlobalId Name Description | R | R | |
Object Typing | IsTypedBy | Type=IfcFlowMeterType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_FlowMeterOccurrence; Name=Pset_FlowMeterTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=ENERGYMETER;Name=Pset_FlowMeterTypeEnergyMeter; | - | - |
Ports | PredefinedType IsNestedBy | PredefinedType=GASMETER;Name=Inlet;Flow=SINK;Type=GAS; PredefinedType=GASMETER;Name=Outlet;Type=GAS;Flow=SOURCE PredefinedType=WATERMETER;Name=Inlet;Flow=SINK;Type=DOMESTICCOLDWATER; PredefinedType=WATERMETER;Name=Outlet;Type=DOMESTICCOLDWATER;Flow=SOURCE | - | - |
Placement | ObjectPlacement | Type=IfcLocalPlacement; | - | - |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | - |
Spatial Containment | ContainedInStructure | Structure=IfcSite; | - | - |
IfcPipeSegment | ||||
Identity | GlobalId Name Description | R | R | |
Object Typing | IsTypedBy | Type=IfcPipeSegmentType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_PipeConnectionFlanged; Name=Pset_PipeSegmentOccurrence;TemplateType=PSET_OCCURRENCEDRIVEN; Name=Pset_PipeSegmentPHistory;TemplateType=PSET_PERFORMANCEDRIVEN; Name=Pset_PipeSegmentTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=CULVERT;Name=Pset_PipeSegmentTypeCulvert;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=GUTTER;Name=Pset_PipeSegmentTypeGutter; | - | - |
Quantity Sets | IsDefinedBy | Name=Qto_PipeSegmentBaseQuantities; | - | - |
Material Profile Set Usage | HasAssociations | Name=Casing; Name=Coating; Name=Insulation; Name=Lining; | - | - |
Ports | PredefinedType IsNestedBy | Name=Inlet;Type=NOTDEFINED;Flow=SINK Name=Outlet;Type=NOTDEFINED;Flow=SOURCE | - | - |
Interference | InterferesElements | - | - | |
Axis Geometry | Representation | RepresentationType=Curve3D;Geometry=IfcPolyline; | - | - |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; RepresentationType=SweptSolid;Geometry=IfcExtrudedAreaSolid; | - | - |
IfcProject | ||||
Identity | GlobalId Name Description | R | R | |
Revision Control | OwnerHistory | O | O | |
Descriptions | Description | O | O | |
Spatial Decomposition | IsDecomposedBy | Spatial Parts=IfcSite; | R | R |
Conversion Units | UnitsInContext | NamedUnitType=LENGTHUNIT; | O | O |
Project Context | RepresentationContexts | ContextIdentifier=Plan;ContextType=2D; ContextIdentifier=Model;ContextType=3D; | R | R |
Project Declaration | Declares | Type=IfcSpaceType; Type=IfcOccupant; Type=IfcActor; Type=IfcSpace; Type=IfcWorkPlan; Type=IfcDistributionElementType; Type=IfcDistributionSystem; | O | O |
IfcPump | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcPumpType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | - | R | |
Quantity Sets | IsDefinedBy | Name=Qto_PumpBaseQuantities; | - | - |
Ports | PredefinedType IsNestedBy | Name=Power;Type=ELECTRICAL;Flow=SINK Name=Inlet;Type=NOTDEFINED;Flow=SINK Name=Outlet;Type=NOTDEFINED;Flow=SOURCE | - | R |
Spatial Containment | ContainedInStructure | - | R | |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | - |
IfcSanitaryTerminal | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | - | - | |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=BATH;Name=Pset_SanitaryTerminalTypeBath; PredefinedType=BIDET;Name=Pset_SanitaryTerminalTypeBidet;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=CISTERN;Name=Pset_SanitaryTerminalTypeCistern;TemplateType=PSET_TYPEDRIVENOVERRIDE; Name=Pset_SanitaryTerminalTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=SANITARYFOUNTAIN;Name=Pset_SanitaryTerminalTypeSanitaryFountain;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=SHOWER;Name=Pset_SanitaryTerminalTypeShower;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=SINK;Name=Pset_SanitaryTerminalTypeSink;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=TOILETPAN;Name=Pset_SanitaryTerminalTypeToiletPan;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=URINAL;Name=Pset_SanitaryTerminalTypeUrinal;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=WASHHANDBASIN;Name=Pset_SanitaryTerminalTypeWashHandBasin; | - | R |
Quantity Sets | IsDefinedBy | Name=Qto_SanitaryTerminalBaseQuantities; | - | - |
Ports | PredefinedType IsNestedBy | PredefinedType=BATH;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=BATH;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=BATH;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=BIDET;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=BIDET;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=BIDET;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=CISTERN;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=CISTERN;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=CISTERN;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=SANITARYFOUNTAIN;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=SANITARYFOUNTAIN;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=SANITARYFOUNTAIN;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=SHOWER;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=SHOWER;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=SHOWER;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=SINK;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=SINK;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=SINK;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=TOILETPAN;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=TOILETPAN;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=URINAL;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=URINAL;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=WASHHANDBASIN;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=WASHHANDBASIN;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=WASHHANDBASIN;Name=Drainage;Type=DRAINAGE;Flow=SOURCE | - | R |
Placement | ObjectPlacement | Type=IfcLocalPlacement; | - | R |
Footprint Geometry | Representation | RepresentationType=GeometricCurveSet;Geometry=IfcGeometricCurveSet; | - | - |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | - |
Clearance Geometry | Representation | - | - | |
Element Connectivity | ConnectedFrom | Type=IfcSlab; Type=IfcCovering; Type=IfcSystemFurnitureElement; | - | - |
IfcSite | ||||
Identity | GlobalId Name Description | - | R | |
Site Location | RefLatitude RefLongitude RefElevation LandTitleNumber SiteAddress | - | O | |
Spatial Decomposition | IsDecomposedBy | Spatial Parts=IfcBuilding; | - | R |
Footprint Geometry | Representation | RepresentationType=GeometricCurveSet;Geometry=IfcGeometricCurveSet; RepresentationType=Annotation2D;Geometry=IfcAnnotationFillArea; | - | O |
IfcSpace | ||||
Identity | GlobalId Name Description | R | R | |
Object Typing | IsTypedBy | Type=IfcSpaceType; | - | O |
Classification | HasAssociations | Source=CSI;Name=OmniClass;Tokens=13-00 00 00; | R | R |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_SpaceOccupancyRequirements; PredefinedType=;Name=Pset_SpaceCommon; | - | O |
Quantity Sets | IsDefinedBy | Name=Qto_SpaceBaseQuantities;TemplateType=QTO_OCCURRENCEDRIVEN; | - | - |
Space Boundaries | BoundedBy | - | - | |
Placement | ObjectPlacement | Type=IfcLocalPlacement; | - | - |
Footprint Geometry | Representation | RepresentationType=GeometricCurveSet;Geometry=IfcGeometricCurveSet; | - | - |
Body Geometry | Representation | RepresentationType=SweptSolid;Geometry=IfcExtrudedAreaSolid; RepresentationType=Clipping;Geometry=IfcBooleanClippingResult; RepresentationType=Brep;Geometry=IfcFacetedBrep; | - | - |
IfcValve | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcValveType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_ValvePHistory; PredefinedType=AIRRELEASE;Name=Pset_ValveTypeAirRelease;TemplateType=PSET_TYPEDRIVENOVERRIDE; Name=Pset_ValveTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=DRAWOFFCOCK;Name=Pset_ValveTypeDrawOffCock;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=FAUCET;Name=Pset_ValveTypeFaucet;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=FLUSHING;Name=Pset_ValveTypeFlushing;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=GASTAP;Name=Pset_ValveTypeGasTap;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=ISOLATING;Name=Pset_ValveTypeIsolating;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=MIXING;Name=Pset_ValveTypeMixing;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=PRESSUREREDUCING;Name=Pset_ValveTypePressureReducing;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=PRESSURERELIEF;Name=Pset_ValveTypePressureRelief; | - | R |
Quantity Sets | IsDefinedBy | Name=Qto_ValveBaseQuantities; | - | - |
Material Constituents | HasAssociations Representation | Name=Casing; Name=Operation; | - | - |
Connectivity | Type=IfcActuator;Relation=IfcRelFlowControlElements; | - | - | |
Ports | PredefinedType IsNestedBy | PredefinedType=AIRHANDLER;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=ANTIVACUUM;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=CHANGEOVER;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=CHANGEOVER;Name=Outlet#1;Type=NOTDEFINED;Flow=SINK PredefinedType=CHANGEOVER;Name=Outlet#2;Type=NOTDEFINED;Flow=SINK PredefinedType=CHECK;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=CHECK;Name=Outlet;Type=NOTDEFINED;Flow=SINK PredefinedType=COMMISSIONING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=COMMISSIONING;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=DIVERTING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DIVERTING;Name=Outlet#1;Type=NOTDEFINED;Flow=SINK PredefinedType=DIVERTING;Name=Outlet#2;Type=NOTDEFINED;Flow=SINK PredefinedType=DOUBLECHECK;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DOUBLECHECK;Name=Outlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DOUBLEREGULATING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DOUBLEREGULATING;Name=Outlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DRAWOFFCOCK;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=FAUCET;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=FLUSHING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=FLUSHING;Name=Outlet;Type=NOTDEFINED;Flow=SINK PredefinedType=GASCOCK;Name=Inlet;Type=GAS;Flow=SINK PredefinedType=GASTAP;Name=Inlet;Type=GAS;Flow=SINK PredefinedType=ISOLATING;Name=Inlet;Type=GAS;Flow=SINK PredefinedType=ISOLATING;Name=Outlet;Type=GAS;Flow=SOURCE PredefinedType=MIXING;Name=Inlet#1;Type=NOTDEFINED;Flow=SINK PredefinedType=MIXING;Name=Inlet#2;Type=NOTDEFINED;Flow=SINK PredefinedType=MIXING;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=PRESSUREREDUCING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=PRESSUREREDUCING;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=PRESSURERELIEF;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=REGULATING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=REGULATING;Name=Inlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=SAFETYCUTOFF;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=SAFETYCUTOFF;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=STEAMTRAP;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=STEAMTRAP;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=STOPCOCK;Name=Inlet;Type=NOTDEFINED;Flow=SINK | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | - |