Performance requirements are elaborated for every water terminal, which may be used to size the plumbing system.
Each element requires the following at incoming water connections:
Each element requires the following at outgoing drainage connections:
Calculations are performed to determine the potential demand and supply of grey water in a facility based on usage by all disciplines. Water Supply Requirements are updated to reflect a revised listing of plumbing equipment types, sizes and locations, if needed.
A plumbing engineer uses the product type templates, updated plans, and other discipline information to determine total water supply requirements. For each plumbing fixture, compatible product types are selected for each product occurrence [or if required by contract arrangement, multiple compatible product types are selected that are suitable]. The project delivery method may require the owner's approval for final product selection. The total water supply requirements are calculated on each branch according to concurrent design load.
System Operation | ||||
---|---|---|---|---|
Entity/Concept | Attributes | Constraints | I | E |
IfcBoiler | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcBoilerType; | - | O |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_BoilerPHistory; Name=Pset_BoilerTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=STEAM;Name=Pset_BoilerTypeSteam;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=WATER;Name=Pset_BoilerTypeWater; | - | R |
Quantity Sets | IsDefinedBy | Name=Qto_BoilerBaseQuantities; | - | - |
Ports | PredefinedType IsNestedBy | PredefinedType=WATER;Name=Gas;Flow=SINK;Type=GAS; PredefinedType=WATER;Name=Exhaust;Type=EXHAUST;Flow=SOURCE PredefinedType=WATER;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=WATER;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SOURCE | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
Clearance Geometry | Representation | - | O | |
IfcBoilerType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Type-Based Ports | IsNestedBy | - | - | |
Classification | HasAssociations | - | - | |
IfcBuilding | ||||
Identity | GlobalId Name Description | - | R | |
Classification | HasAssociations | Source=CSI;Name=OmniClass;Tokens=11-00 00 00; | - | R |
Properties for Occurrences | PredefinedType IsDefinedBy | Name=Pset_BuildingCommon; | - | O |
Product Assignment | ReferencedBy | Type=IfcTask; | - | - |
Spatial Decomposition | IsDecomposedBy | Spatial Parts=IfcBuildingStorey; | - | R |
Building Location | ElevationOfRefHeight ElevationOfTerrain BuildingAddress | - | O | |
IfcBuildingStorey | ||||
Identity | GlobalId Name Description | - | R | |
Properties for Occurrences | PredefinedType IsDefinedBy | Name=Pset_BuildingStoreyCommon;TemplateType=PSET_OCCURRENCEDRIVEN; | - | - |
Building Storey Elevation | Elevation | - | R | |
Spatial Decomposition | IsDecomposedBy | Spatial Parts=IfcSpace; | - | O |
IfcDistributionPort | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=PIPE;Name=Pset_DistributionPortTypePipe; | O | O |
Material Profile Set Usage | HasAssociations | Name=Pipe;Profile=IfcCircleHollowProfileDef; | R | R |
Port Connectivity | ConnectedTo | O | R | |
Placement | ObjectPlacement | R | R | |
Properties for Types | HasPropertySets | - | - | |
IfcElectricAppliance | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcElectricApplianceType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_ElectricAppliancePHistory; Name=Pset_ElectricApplianceTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=DISHWASHER;Name=Pset_ElectricApplianceTypeDishwasher; | - | R |
Ports | PredefinedType IsNestedBy | PredefinedType=DISHWASHER;Name=HotWater;Flow=SINK;Type=DOMESTICHOTWATER; PredefinedType=DISHWASHER;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=FRIDGE_FREEZER;Name=ColdWater;Flow=SINK;Type=DOMESTICCOLDWATER; PredefinedType=WASHINGMACHINE;Name=ColdWater;Flow=SINK;Type=DOMESTICCOLDWATER; PredefinedType=WASHINGMACHINE;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=WASHINGMACHINE;Name=Drainage;Type=DRAINAGE;Flow=SOURCE | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
IfcElectricApplianceType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Type-Based Ports | IsNestedBy | - | - | |
Classification | HasAssociations | - | - | |
IfcFilter | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcFilterType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_FilterPHistory; PredefinedType=;Name=Pset_FilterTypeCommon; PredefinedType=WATERFILTER;Name=Pset_FilterTypeWaterFilter; | - | R |
Ports | PredefinedType IsNestedBy | PredefinedType=ODORFILTER;Name=Inlet;Flow=SINK;Type=EXHAUST; PredefinedType=ODORFILTER;Name=Outlet;Type=EXHAUST;Flow=SOURCE PredefinedType=STRAINER;Name=Inlet;Flow=SINK;Type=DRAINAGE; PredefinedType=STRAINER;Name=Outlet;Type=DRAINAGE;Flow=SOURCE PredefinedType=WATERFILTER;Name=Inlet;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=WATERFILTER;Name=Outlet;Type=DOMESTICCOLDWATER;Flow=SOURCE | - | R |
Spatial Containment | ContainedInStructure | - | R | |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
IfcFilterType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Type-Based Ports | IsNestedBy | - | - | |
Classification | HasAssociations | - | - | |
IfcFlowMeter | ||||
Identity | GlobalId Name Description | R | R | |
Object Typing | IsTypedBy | Type=IfcFlowMeterType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_FlowMeterOccurrence; Name=Pset_FlowMeterTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=ENERGYMETER;Name=Pset_FlowMeterTypeEnergyMeter; | - | O |
Ports | PredefinedType IsNestedBy | PredefinedType=GASMETER;Name=Inlet;Flow=SINK;Type=GAS; PredefinedType=GASMETER;Name=Outlet;Type=GAS;Flow=SOURCE PredefinedType=WATERMETER;Name=Inlet;Flow=SINK;Type=DOMESTICCOLDWATER; PredefinedType=WATERMETER;Name=Outlet;Type=DOMESTICCOLDWATER;Flow=SOURCE | - | R |
Placement | ObjectPlacement | Type=IfcLocalPlacement; | - | - |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
Spatial Containment | ContainedInStructure | Structure=IfcSite; | - | R |
IfcFlowMeterType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Type-Based Ports | IsNestedBy | - | - | |
Classification | HasAssociations | - | - | |
IfcMember | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcMemberType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | Name=Pset_MemberCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; | - | - |
Material Profile Set | HasAssociations | - | - | |
Placement | ObjectPlacement | - | - | |
Axis Geometry | Representation | Rep Identifier=Axis;Identifier=;RepresentationType=Curve3D;Type=;Geometry=IfcBoundedCurve; | - | - |
Body Geometry | Representation | RepresentationType=SweptSolid;Geometry=IfcExtrudedAreaSolid; RepresentationType=Clipping;Geometry=IfcBooleanClippingResult; RepresentationType=AdvancedSweptSolid;Geometry=IfcSweptAreaSolid; RepresentationType=SurfaceModel;Geometry=IfcFaceBasedSurfaceModel; RepresentationType=Brep;Geometry=IfcFacetedBrep; RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | - |
IfcOpeningElement | ||||
Identity | GlobalId Name Description | - | R | |
Placement | ObjectPlacement | - | R | |
Body Geometry | Representation | RepresentationType=SweptSolid;Geometry=IfcExtrudedAreaSolid; RepresentationType=Brep;Geometry=IfcFacetedBrep; | - | R |
IfcPipeFitting | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcPipeFittingType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_PipeFittingOccurrence; Name=Pset_PipeFittingPHistory;TemplateType=PSET_PERFORMANCEDRIVEN; PredefinedType=BEND;Name=Pset_PipeFittingTypeBend;TemplateType=PSET_TYPEDRIVENOVERRIDE; Name=Pset_PipeFittingTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=JUNCTION;Name=Pset_PipeFittingTypeJunction; | - | - |
Quantity Sets | IsDefinedBy | Name=Qto_PipeFittingBaseQuantities; | - | - |
Ports | PredefinedType IsNestedBy | PredefinedType=BEND;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=BEND;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=CONNECTOR;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=CONNECTOR;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=ENTRY;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=EXIT;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=JUNCTION;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=JUNCTION;Name=Outlet#1;Type=NOTDEFINED;Flow=SOURCE PredefinedType=JUNCTION;Name=Outlet#2;Type=NOTDEFINED;Flow=SOURCE PredefinedType=OBSTRUCTION;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=OBSTRUCTION;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE | - | - |
IfcPipeFittingType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Classification | HasAssociations | - | - | |
IfcPipeSegment | ||||
Identity | GlobalId Name Description | R | R | |
Object Typing | IsTypedBy | Type=IfcPipeSegmentType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_PipeConnectionFlanged; Name=Pset_PipeSegmentOccurrence;TemplateType=PSET_OCCURRENCEDRIVEN; Name=Pset_PipeSegmentPHistory;TemplateType=PSET_PERFORMANCEDRIVEN; Name=Pset_PipeSegmentTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=CULVERT;Name=Pset_PipeSegmentTypeCulvert;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=GUTTER;Name=Pset_PipeSegmentTypeGutter; | - | - |
Quantity Sets | IsDefinedBy | Name=Qto_PipeSegmentBaseQuantities; | - | - |
Material Profile Set Usage | HasAssociations | Name=Casing; Name=Coating; Name=Insulation; Name=Lining; | - | R |
Ports | PredefinedType IsNestedBy | Name=Inlet;Type=NOTDEFINED;Flow=SINK Name=Outlet;Type=NOTDEFINED;Flow=SOURCE | - | R |
Interference | InterferesElements | - | R | |
Axis Geometry | Representation | RepresentationType=Curve3D;Geometry=IfcPolyline; | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; RepresentationType=SweptSolid;Geometry=IfcExtrudedAreaSolid; | - | - |
IfcPipeSegmentType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Material Profile Set | HasAssociations | - | - | |
Classification | HasAssociations | - | - | |
IfcProject | ||||
Identity | GlobalId Name Description | R | R | |
Revision Control | OwnerHistory | O | O | |
Descriptions | Description | O | O | |
Spatial Decomposition | IsDecomposedBy | Spatial Parts=IfcSite; | R | R |
Conversion Units | UnitsInContext | NamedUnitType=LENGTHUNIT; | O | O |
Project Context | RepresentationContexts | ContextIdentifier=Plan;ContextType=2D; ContextIdentifier=Model;ContextType=3D; | R | R |
Project Declaration | Declares | Type=IfcSpaceType; Type=IfcOccupant; Type=IfcActor; Type=IfcSpace; Type=IfcWorkPlan; Type=IfcDistributionElementType; Type=IfcDistributionSystem; | O | O |
IfcPump | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcPumpType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | - | R | |
Quantity Sets | IsDefinedBy | Name=Qto_PumpBaseQuantities; | - | - |
Ports | PredefinedType IsNestedBy | Name=Power;Type=ELECTRICAL;Flow=SINK Name=Inlet;Type=NOTDEFINED;Flow=SINK Name=Outlet;Type=NOTDEFINED;Flow=SOURCE | - | R |
Spatial Containment | ContainedInStructure | - | R | |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
IfcPumpType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Type-Based Ports | IsNestedBy | - | - | |
Classification | HasAssociations | - | - | |
IfcSanitaryTerminal | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | - | - | |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=BATH;Name=Pset_SanitaryTerminalTypeBath; PredefinedType=BIDET;Name=Pset_SanitaryTerminalTypeBidet;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=CISTERN;Name=Pset_SanitaryTerminalTypeCistern;TemplateType=PSET_TYPEDRIVENOVERRIDE; Name=Pset_SanitaryTerminalTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=SANITARYFOUNTAIN;Name=Pset_SanitaryTerminalTypeSanitaryFountain;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=SHOWER;Name=Pset_SanitaryTerminalTypeShower;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=SINK;Name=Pset_SanitaryTerminalTypeSink;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=TOILETPAN;Name=Pset_SanitaryTerminalTypeToiletPan;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=URINAL;Name=Pset_SanitaryTerminalTypeUrinal;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=WASHHANDBASIN;Name=Pset_SanitaryTerminalTypeWashHandBasin; | - | R |
Quantity Sets | IsDefinedBy | Name=Qto_SanitaryTerminalBaseQuantities; | - | - |
Ports | PredefinedType IsNestedBy | PredefinedType=BATH;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=BATH;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=BATH;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=BIDET;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=BIDET;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=BIDET;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=CISTERN;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=CISTERN;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=CISTERN;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=SANITARYFOUNTAIN;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=SANITARYFOUNTAIN;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=SANITARYFOUNTAIN;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=SHOWER;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=SHOWER;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=SHOWER;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=SINK;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=SINK;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=SINK;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=TOILETPAN;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=TOILETPAN;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=URINAL;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=URINAL;Name=Drainage;Type=DRAINAGE;Flow=SOURCE PredefinedType=WASHHANDBASIN;Name=ColdWater;Type=DOMESTICCOLDWATER;Flow=SINK PredefinedType=WASHHANDBASIN;Name=HotWater;Type=DOMESTICHOTWATER;Flow=SINK PredefinedType=WASHHANDBASIN;Name=Drainage;Type=DRAINAGE;Flow=SOURCE | - | R |
Placement | ObjectPlacement | Type=IfcLocalPlacement; | - | R |
Footprint Geometry | Representation | RepresentationType=GeometricCurveSet;Geometry=IfcGeometricCurveSet; | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
Clearance Geometry | Representation | - | O | |
Element Connectivity | ConnectedFrom | Type=IfcSlab; Type=IfcCovering; Type=IfcSystemFurnitureElement; | - | O |
IfcSanitaryTerminalType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | Name=Pset_SanitaryTerminalCommon; | - | - |
Type-Based Ports | IsNestedBy | - | - | |
Body Geometry | RepresentationMaps | RepresentationType=Brep;Geometry=IfcFacetedBrep; | - | - |
Clearance Geometry | RepresentationMaps | Type=SurfaceModel;Geometry=IfcFaceBasedSurfaceModel; | - | - |
Classification | HasAssociations | - | - | |
IfcSite | ||||
Identity | GlobalId Name Description | - | R | |
Site Location | RefLatitude RefLongitude RefElevation LandTitleNumber SiteAddress | - | O | |
Spatial Decomposition | IsDecomposedBy | Spatial Parts=IfcBuilding; | - | R |
Footprint Geometry | Representation | RepresentationType=GeometricCurveSet;Geometry=IfcGeometricCurveSet; RepresentationType=Annotation2D;Geometry=IfcAnnotationFillArea; | - | O |
IfcSlab | ||||
Identity | GlobalId Name Description | R | R | |
Voiding | HasOpenings | - | R | |
IfcSlabElementedCase | ||||
Identity | GlobalId Name Description | - | R | |
Aggregation | PredefinedType IsDecomposedBy | PredefinedType=;RelatedObjects=IfcBeam; PredefinedType=;RelatedObjects=IfcPlate; PredefinedType=;RelatedObjects=IfcBuildingElementPart; | - | O |
Placement | ObjectPlacement | - | R | |
Surface Geometry | Representation | RepresentationType=Surface3D;Geometry=IfcBoundedSurface; | - | O |
Spatial Containment | ContainedInStructure | Structure=IfcBuildingStorey; | - | R |
IfcSlabStandardCase | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcSlabType; | - | - |
Material Layer Set Usage | HasAssociations | - | R | |
Body Geometry | Representation | RepresentationType=SweptSolid;Geometry=IfcExtrudedAreaSolid; RepresentationType=Clipping;Geometry=IfcBooleanClippingResult; | - | R |
IfcSolarDevice | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcSolarDeviceType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_SolarDeviceTypeCommon; | - | O |
Ports | PredefinedType IsNestedBy | PredefinedType=SOLARCOLLECTOR;Name=Inlet;Flow=SOURCE;Type=HEATING; PredefinedType=SOLARCOLLECTOR;Name=Outlet;Flow=SINK;Type=HEATING; | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
IfcSolarDeviceType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Type-Based Ports | IsNestedBy | - | - | |
Body Geometry | RepresentationMaps | RepresentationType=Brep;Geometry=IfcFacetedBrep; | - | - |
Clearance Geometry | RepresentationMaps | Type=SurfaceModel;Geometry=IfcFaceBasedSurfaceModel; | - | - |
Classification | HasAssociations | - | - | |
IfcSpace | ||||
Identity | GlobalId Name Description | R | R | |
Object Typing | IsTypedBy | Type=IfcSpaceType; | - | O |
Classification | HasAssociations | Source=CSI;Name=OmniClass;Tokens=13-00 00 00; | R | R |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_SpaceOccupancyRequirements; PredefinedType=;Name=Pset_SpaceCommon; | - | O |
Quantity Sets | IsDefinedBy | Name=Qto_SpaceBaseQuantities;TemplateType=QTO_OCCURRENCEDRIVEN; | - | O |
Space Boundaries | BoundedBy | - | - | |
Placement | ObjectPlacement | Type=IfcLocalPlacement; | - | R |
Footprint Geometry | Representation | RepresentationType=GeometricCurveSet;Geometry=IfcGeometricCurveSet; | - | R |
Body Geometry | Representation | RepresentationType=SweptSolid;Geometry=IfcExtrudedAreaSolid; RepresentationType=Clipping;Geometry=IfcBooleanClippingResult; RepresentationType=Brep;Geometry=IfcFacetedBrep; | - | R |
IfcSystemFurnitureElement | ||||
Identity | GlobalId Name Description | R | R | |
Object Typing | IsTypedBy | Type=IfcSystemFurnitureElementType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_SystemFurnitureElementTypeCommon; PredefinedType=PANEL;Name=Pset_SystemFurnitureElementTypePanel;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=WORKSURFACE;Name=Pset_SystemFurnitureElementTypeWorkSurface; | - | - |
Material Constituents | HasAssociations Representation | Name=Finish; Name=Frame; Name=Hardware; Name=Padding; Name=Panel; | - | - |
Placement | ObjectPlacement | - | - | |
Body Geometry | Representation | - | - | |
System furniture element types | PredefinedType | - | - | |
IfcSystemFurnitureElementType | ||||
Identity | GlobalId Name Description | R | R | |
Properties for Types | HasPropertySets | - | - | |
Classification | HasAssociations | - | - | |
IfcValve | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcValveType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_ValvePHistory; PredefinedType=AIRRELEASE;Name=Pset_ValveTypeAirRelease;TemplateType=PSET_TYPEDRIVENOVERRIDE; Name=Pset_ValveTypeCommon;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=DRAWOFFCOCK;Name=Pset_ValveTypeDrawOffCock;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=FAUCET;Name=Pset_ValveTypeFaucet;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=FLUSHING;Name=Pset_ValveTypeFlushing;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=GASTAP;Name=Pset_ValveTypeGasTap;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=ISOLATING;Name=Pset_ValveTypeIsolating;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=MIXING;Name=Pset_ValveTypeMixing;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=PRESSUREREDUCING;Name=Pset_ValveTypePressureReducing;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=PRESSURERELIEF;Name=Pset_ValveTypePressureRelief; | - | R |
Quantity Sets | IsDefinedBy | Name=Qto_ValveBaseQuantities; | - | - |
Material Constituents | HasAssociations Representation | Name=Casing; Name=Operation; | - | - |
Connectivity | Type=IfcActuator;Relation=IfcRelFlowControlElements; | - | R | |
Ports | PredefinedType IsNestedBy | PredefinedType=AIRHANDLER;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=ANTIVACUUM;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=CHANGEOVER;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=CHANGEOVER;Name=Outlet#1;Type=NOTDEFINED;Flow=SINK PredefinedType=CHANGEOVER;Name=Outlet#2;Type=NOTDEFINED;Flow=SINK PredefinedType=CHECK;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=CHECK;Name=Outlet;Type=NOTDEFINED;Flow=SINK PredefinedType=COMMISSIONING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=COMMISSIONING;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=DIVERTING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DIVERTING;Name=Outlet#1;Type=NOTDEFINED;Flow=SINK PredefinedType=DIVERTING;Name=Outlet#2;Type=NOTDEFINED;Flow=SINK PredefinedType=DOUBLECHECK;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DOUBLECHECK;Name=Outlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DOUBLEREGULATING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DOUBLEREGULATING;Name=Outlet;Type=NOTDEFINED;Flow=SINK PredefinedType=DRAWOFFCOCK;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=FAUCET;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=FLUSHING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=FLUSHING;Name=Outlet;Type=NOTDEFINED;Flow=SINK PredefinedType=GASCOCK;Name=Inlet;Type=GAS;Flow=SINK PredefinedType=GASTAP;Name=Inlet;Type=GAS;Flow=SINK PredefinedType=ISOLATING;Name=Inlet;Type=GAS;Flow=SINK PredefinedType=ISOLATING;Name=Outlet;Type=GAS;Flow=SOURCE PredefinedType=MIXING;Name=Inlet#1;Type=NOTDEFINED;Flow=SINK PredefinedType=MIXING;Name=Inlet#2;Type=NOTDEFINED;Flow=SINK PredefinedType=MIXING;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=PRESSUREREDUCING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=PRESSUREREDUCING;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=PRESSURERELIEF;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=REGULATING;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=REGULATING;Name=Inlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=SAFETYCUTOFF;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=SAFETYCUTOFF;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=STEAMTRAP;Name=Inlet;Type=NOTDEFINED;Flow=SINK PredefinedType=STEAMTRAP;Name=Outlet;Type=NOTDEFINED;Flow=SOURCE PredefinedType=STOPCOCK;Name=Inlet;Type=NOTDEFINED;Flow=SINK | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
IfcWall | ||||
Identity | GlobalId Name Description | R | R | |
Path Connectivity | ConnectedFrom | RelatedElement=IfcWall; | - | - |
Voiding | HasOpenings | RelatedOpening=IfcOpeningElement; | - | R |
IfcWallElementedCase | ||||
Identity | GlobalId Name Description | - | R | |
Aggregation | PredefinedType IsDecomposedBy | PredefinedType=;RelatedObjects=IfcMember; PredefinedType=;RelatedObjects=IfcPlate; PredefinedType=;RelatedObjects=IfcBuildingElementPart; PredefinedType=;RelatedObjects=IfcBeam; | - | O |
Placement | ObjectPlacement | - | R | |
Axis Geometry | Representation | RepresentationType=Curve2D;Geometry=IfcBoundedCurve; | - | R |
Surface Geometry | Representation | RepresentationType=Surface3D;Geometry=IfcBoundedSurface; | - | O |
Spatial Containment | ContainedInStructure | Structure=IfcSite; Structure=IfcBuildingStorey; | - | R |
IfcWallStandardCase | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcWallType; | - | - |
Material Layer Set Usage | HasAssociations | - | R | |
Axis Geometry | Representation | RepresentationType=Curve2D;Geometry=IfcBoundedCurve; | - | R |
Body Geometry | Representation | RepresentationType=SweptSolid;Geometry=IfcExtrudedAreaSolid; RepresentationType=Clipping;Geometry=IfcBooleanClippingResult; | - | R |
IfcWasteTerminal | ||||
Identity | GlobalId Name Description | - | R | |
Object Typing | IsTypedBy | Type=IfcWasteTerminalType; | - | - |
Properties for Occurrences | PredefinedType IsDefinedBy | PredefinedType=;Name=Pset_WasteTerminalTypeCommon; PredefinedType=FLOORTRAP;Name=Pset_WasteTerminalTypeFloorTrap;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=FLOORWASTE;Name=Pset_WasteTerminalTypeFloorWaste;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=GULLYSUMP;Name=Pset_WasteTerminalTypeGullySump;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=GULLYTRAP;Name=Pset_WasteTerminalTypeGullyTrap;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=ROOFDRAIN;Name=Pset_WasteTerminalTypeRoofDrain;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=WASTEDISPOSALUNIT;Name=Pset_WasteTerminalTypeWasteDisposalUnit;TemplateType=PSET_TYPEDRIVENOVERRIDE; PredefinedType=WASTETRAP;Name=Pset_WasteTerminalTypeWasteTrap; | - | R |
Quantity Sets | IsDefinedBy | Name=Qto_WasteTerminalBaseQuantities; | - | - |
Ports | PredefinedType IsNestedBy | PredefinedType=FLOORTRAP;Name=Inlet;Type=DRAINAGE;Flow=SINK PredefinedType=FLOORTRAP;Name=Outlet;Type=DRAINAGE;Flow=SOURCE PredefinedType=FLOORWASTE;Name=Inlet;Type=WASTE;Flow=SINK PredefinedType=FLOORWASTE;Name=Outlet;Type=WASTE;Flow=SOURCE PredefinedType=GULLYSUMP;Name=Inlet;Type=WASTE;Flow=SINK PredefinedType=GULLYSUMP;Name=Inlet;Type=WASTE;Flow=SOURCE PredefinedType=GULLYTRAP;Name=Inlet;Type=WASTE;Flow=SINK PredefinedType=GULLYTRAP;Name=Inlet;Type=WASTE;Flow=SOURCE PredefinedType=ROOFDRAIN;Name=Outlet;Type=RAINWATER;Flow=SOURCE PredefinedType=WASTEDISPOSALUNIT;Name=Inlet;Type=WASTE;Flow=SINK PredefinedType=WASTEDISPOSALUNIT;Name=Outlet;Type=WASTE;Flow=SOURCE PredefinedType=WASTETRAP;Name=Inlet;Type=WASTE;Flow=SINK PredefinedType=WASTETRAP;Name=Outlet;Type=WASTE;Flow=SOURCE | - | R |
Body Geometry | Representation | RepresentationType=MappedRepresentation;Geometry=IfcMappedItem; | - | R |
Clearance Geometry | Representation | - | O | |
IfcWasteTerminalType | ||||
Identity | GlobalId Name Description | R | R | |
Type-Based Ports | IsNestedBy | - | - | |
Body Geometry | RepresentationMaps | - | - | |
Clearance Geometry | RepresentationMaps | Type=SurfaceModel;Geometry=IfcFaceBasedSurfaceModel; | - | - |
Properties for Types | HasPropertySets | - | - | |
Classification | HasAssociations | - | - |