IfcStructuralCurveAction

Natural language names
deveränderliche Linienlast
enStructural Curve Action
Change log
ItemSPFXMLChangeDescription
IFC2x3 to IFC4
    IfcStructuralCurveActionADDED
IFC4 to IFC4 ADD1
    IfcStructuralCurveAction
      DestabilizingLoadMODIFIEDType changed from BOOLEAN to IfcBoolean.
Semantic definitions at the entity
Entity definition

A structural curve action defines an action which is distributed over a curve. A curve action may be connected with a curve member or curve connection, or surface member or surface connection.

HISTORY  New entity in IFC4.
IFC4 CHANGE  Former entity IfcStructuralLinearActionVarying from IFC2x2 has been removed and are replaced by this entity.

Coordinate Systems:

See definitions at IfcStructuralActivity.

Topology Use Definitions:

Standard Case:
If connected with a curve item, instances of IfcStructuralCurveAction shall not have an ObjectPlacement nor a Representation. It is implied that the placement and representation of the IfcStructuralActivity is the same as the ones of the member or connection.

Special Case 1:
If connected with a surface item, instances of IfcStructuralCurveAction shall have an ObjectPlacement and Representation, containing an IfcEdgeCurve. See IfcStructuralActivity for further definitions.

Special Case 2:
If not connected with a structural item (which may happen in an incomplete or conceptual model), a curve action should have an ObjectPlacement and Representation, containing an IfcEdgeCurve. See IfcStructuralActivity for further definitions.

Informal Propositions:

  1. If the curve action is of the predefined type CONST, SINUS, or PARABOLA, SELF\IfcStructuralActivity.AppliedLoad must not be of type IfcStructuralLoadConfiguration. In case of SINUS and PARABOLA, the load item defines the maximum of the load at the centre of the load distribution.
  2. If the curve action is of the predefined type LINEAR, SELF\IfcStructuralActivity.AppliedLoad shall be of type IfcStructuralLoadConfiguration and shall contain two items.
  3. If the curve action is of the predefined type POLYGONAL, SELF\IfcStructuralActivity.AppliedLoad shall be of type IfcStructuralLoadConfiguration and shall contain three or more items.
  4. If the curve action is of the predefined type DISCRETE, SELF\IfcStructuralActivity.AppliedLoad shall be of type IfcStructuralLoadConfiguration and shall contain two or more items.
  5. In case of types LINEAR, POLYGONAL, and DISCRETE, the load items shall have one-dimensional IfcStructuralLoadConfiguration.Locations, defining the location of the load samples in local coordinates of the curve action. The load items shall be provided in ascending order according to their locations. The first and the last load item define the extent of the load distribution.
  6. Point actions must be of type DISCRETE, thus contain two or more load points. (Single point loads are modeled by IfcStructuralPointAction.)
  7. All items in SELF\IfcStructuralActivity.AppliedLoad\IfcStructuralLoadConfiguration.Values shall be of the same entity type.
Attribute definitions
#AttributeTypeCardinalityDescription B
11ProjectedOrTrue- This attribute is out of scope for this model view definition and shall not be set.
12PredefinedTypeIfcStructuralCurveActivityTypeEnum[1:1] Type of action according to its distribution of load values.X
Formal Propositions
RuleDescription
ProjectedIsGlobalA load can only be related to projected length if it was specified in global coordinate directions (i.e. in analysis model coordinate directions). If a load was specified in local coordinate directions, it can only relate to true length.
HasObjectTypeThe attribute ObjectType shall be given if the predefined type is set to USERDEFINED.
SuitablePredefinedTypeThe EQUIDISTANT distribution type is out of scope of structural curve actions.
Inherited definitions from supertypes
Entity inheritance IfcStructuralAction IfcStructuralActivity IfcProduct IfcObject IfcObjectDefinition IfcRoot
Attribute inheritance
#AttributeTypeCardinalityDescriptionB
IfcRoot
1GlobalIdIfcGloballyUniqueId[1:1] Assignment of a globally unique identifier within the entire software world. X
2OwnerHistoryIfcOwnerHistory[0:1] Assignment of the information about the current ownership of that object, including owning actor, application, local identification and information captured about the recent changes of the object,
NOTE  only the last modification in stored - either as addition, deletion or modification.
X
3NameIfcLabel[0:1] Optional name for use by the participating software systems or users. For some subtypes of IfcRoot the insertion of the Name attribute may be required. This would be enforced by a where rule. X
4DescriptionIfcText[0:1] Optional description, provided for exchanging informative comments.X
IfcObjectDefinition
HasAssignmentsIfcRelAssigns
@RelatedObjects		S[0:?]Reference to the relationship objects, that assign (by an association relationship) other subtypes of IfcObject to this object instance. Examples are the association to products, processes, controls, resources or groups.X
NestsIfcRelNests
@RelatedObjects		S[0:1]References to the decomposition relationship being a nesting. It determines that this object definition is a part within an ordered whole/part decomposition relationship. An object occurrence or type can only be part of a single decomposition (to allow hierarchical strutures only).
IsNestedByIfcRelNests
@RelatingObject		S[0:?]References to the decomposition relationship being a nesting. It determines that this object definition is the whole within an ordered whole/part decomposition relationship. An object or object type can be nested by several other objects (occurrences or types). X
HasContextIfcRelDeclares
@RelatedDefinitions		S[0:1]References to the context providing context information such as project unit or representation context. It should only be asserted for the uppermost non-spatial object.
IsDecomposedByIfcRelAggregates
@RelatingObject		S[0:?]References to the decomposition relationship being an aggregation. It determines that this object definition is whole within an unordered whole/part decomposition relationship. An object definitions can be aggregated by several other objects (occurrences or parts). X
DecomposesIfcRelAggregates
@RelatedObjects		S[0:1]References to the decomposition relationship being an aggregation. It determines that this object definition is a part within an unordered whole/part decomposition relationship. An object definitions can only be part of a single decomposition (to allow hierarchical strutures only). X
HasAssociationsIfcRelAssociates
@RelatedObjects		S[0:?]Reference to the relationship objects, that associates external references or other resource definitions to the object.. Examples are the association to library, documentation or classification.X
IfcObject
5ObjectType- This attribute is out of scope for this model view definition and shall not be set.
IsTypedByIfcRelDefinesByType
@RelatedObjects		S[0:1]Set of relationships to the object type that provides the type definitions for this object occurrence. The then associated IfcTypeObject, or its subtypes, contains the specific information (or type, or style), that is common to all instances of IfcObject, or its subtypes, referring to the same type. X
IsDefinedByIfcRelDefinesByProperties
@RelatedObjects		S[0:?]Set of relationships to property set definitions attached to this object. Those statically or dynamically defined properties contain alphanumeric information content that further defines the object. X
IfcProduct
6ObjectPlacementIfcObjectPlacement[0:1] Placement of the product in space, the placement can either be absolute (relative to the world coordinate system), relative (relative to the object placement of another product), or constraint (e.g. relative to grid axes). It is determined by the various subtypes of IfcObjectPlacement, which includes the axis placement information to determine the transformation for the object coordinate system.X
7RepresentationIfcProductRepresentation[0:1] Reference to the representations of the product, being either a representation (IfcProductRepresentation) or as a special case a shape representations (IfcProductDefinitionShape). The product definition shape provides for multiple geometric representations of the shape property of the object within the same object coordinate system, defined by the object placement.X
ReferencedByIfcRelAssignsToProduct
@RelatingProduct		S[0:?]Reference to the IfcRelAssignsToProduct relationship, by which other products, processes, controls, resources or actors (as subtypes of IfcObjectDefinition) can be related to this product.X
IfcStructuralActivity
8AppliedLoadIfcStructuralLoad[1:1] Load or result resource object which defines the load type, direction, and load values.

In case of activities which are variably distributed over curves or surfaces, IfcStructuralLoadConfiguration is used which provides a list of load samples and their locations within the load distribution, measured in local coordinates of the curve or surface on which this activity acts. The contents of this load or result distribution may be further restricted by definitions at subtypes of IfcStructuralActivity.

X
9GlobalOrLocalIfcGlobalOrLocalEnum[1:1] Indicates whether the load directions refer to the global coordinate system (global to the analysis model, i.e. as established by IfcStructuralAnalysisModel.SharedPlacement) or to the local coordinate system (local to the activity or connected item, as established by an explicit or implied representation and its parameter space).
NOTE, the informal definition of IfcRepresentationResource.IfcGlobalOrLocalEnum doe s not distinguish between "global coordinate system" and "world coordinate system". On the other hand, this distinction is necessary in the IfcStructuralAnalysisDomain where the shared "global" coordinate system of an analysis model may very well not be the same as the project-wide world coordinate system.
NOTE  In the scope of IfcStructuralActivity.GlobalOrLocal, the meaning of GLOBAL_COORDS is therefore not to be taken as world coordinate system but as the analysis model specific shared coordinate system. In contrast, LOCAL_COORDS is to be taken as coordinates which are local to individual structural items and activities, as established by subclass-specific geometry use definitions.
X
AssignedToStructuralItemIfcRelConnectsStructuralActivity
@RelatedStructuralActivity		S[0:1]Reference to the IfcRelConnectsStructuralActivity relationship by which activities are connected with structural items.
IfcStructuralAction
10DestabilizingLoad- This attribute is out of scope for this model view definition and shall not be set.
IfcStructuralCurveAction
11ProjectedOrTrue- This attribute is out of scope for this model view definition and shall not be set.
12PredefinedTypeIfcStructuralCurveActivityTypeEnum[1:1] Type of action according to its distribution of load values.X
Definitions applying to Bridge View
Concept inheritance

#ConceptModel View
IfcRoot
Software IdentityBridge View
User IdentityBridge View
Object OwnershipBridge View
IfcObject
Property Sets for ObjectsBridge View
Formal representations
XSD Specification
 <xs:element name="IfcStructuralCurveAction" type="ifc:IfcStructuralCurveAction" substitutionGroup="ifc:IfcStructuralAction" nillable="true"/>
 <xs:complexType name="IfcStructuralCurveAction">
  <xs:complexContent>
   <xs:extension base="ifc:IfcStructuralAction">
    <xs:attribute name="PredefinedType" type="ifc:IfcStructuralCurveActivityTypeEnum" use="optional"/>
   </xs:extension>
  </xs:complexContent>
 </xs:complexType>
EXPRESS Specification
ENTITY IfcStructuralCurveAction
 SUBTYPE OF (IfcStructuralAction);
  ProjectedOrTrue : OPTIONAL IfcStrippedOptional;
  PredefinedType : IfcStructuralCurveActivityTypeEnum;
 WHERE
  ProjectedIsGlobal : (NOT EXISTS(ProjectedOrTrue)) OR ((ProjectedOrTrue <> PROJECTED_LENGTH) OR (SELF\IfcStructuralActivity.GlobalOrLocal = GLOBAL_COORDS));
  HasObjectType : (PredefinedType <> IfcStructuralCurveActivityTypeEnum.USERDEFINED) OR EXISTS(SELF\IfcObject.ObjectType);
  SuitablePredefinedType : PredefinedType <> IfcStructuralCurveActivityTypeEnum.EQUIDISTANT;
END_ENTITY;

Link to EXPRESS-G diagram EXPRESS-G diagram

Link to this page  Link to this page